Doors Upgrade Options

Arch Angle can offer the option of a small bottom vent panel. It is a small inset removable panel of glass that can be interchanged with a small screen panel.

Tinted, Low E, Acrylic, Polycarbonate

Offer UV protection and cut down on heat build up between the storm and entry door.

A storm door is over 90% glass. The benefit of a full frame insulation is outweighed by the cost and actual efficiency. However, our insulated recessed kick panel can enhance the solid feel of the door and add to both sound deadening and some added energy efficiency near the bottom of the door. Insulated, the bottom panel is inserted with insulfill foam that is then sandwiched between two front and back aluminum panels making the door more solid and rigid than the customary single panel.

A 1X2” hardwood insert put into the hollow hinge side of the aluminum extrusion. Recommended, especially on oversize width doors where the weight of the glass increases the weight on the hinges. The hardwood insert allows the hinge screws to be retightened or replaced should they ever begin to loosen from the frame.

(Recessed bottom panel-not a toe kick) All finishes not available in all widths.

Polished Brass, Antique Brass, Satin Nickel, Cast Iron, Weathered Rust, Oil Rubbed Bronze, Stainless, Pewter and Weathered Black.

Polished Brass, Antique Brass, Polished Chrome, Polished Nickel, Satin Nickel, Oil Rubbed Bronze, Antique Pewter and Matte Black.

Top glass and bottom screen are stationary and permanent.  Bottom glass slides up and down and is removable.

Recommended insulated also: two panels instead of single for Sound deadening.)

(Wright) surface mount/ field installed

Polished Brass, Satin Nickel, Oil Rubbed Bronze, Antique Brass, Vermont Black, Newport White

Newport White Lever, chain and closer

(Waritan) sets with dummy handles

Polished Brass, Satin Chrome, Black Chrome

Recommended on OS height